Mitsubishi 700 Series User Manual

II
2.3 E700 Installation Procedure............................................................................................... 32
2.4 Wiring .................................................................................................................................. 33
3 INVERTER SETTINGS 34
3.1 Network Setting .................................................................................................................. 35
3.2 Operation Mode Setting ..................................................................................................... 37
3.2.1 Operation Mode Indication ....................................................................................................................... 37
3.2.2 Operation Mode Switching & Comm. Startup Mode (Pr. 79, Pr. 340) ......................................................... 38
3.3 Operation & Speed Command Source (Pr. 338, Pr. 339, Pr. 550) ...................................... 42
3.4 Communication EEPROM Write Selection (Pr. 342) ......................................................... 46
4 REGISTER NUMBERING AND BEHAVIOR 47
4.1 Register Numbers ............................................................................................................... 47
4.2 Scanned Registers ............................................................................................................. 50
4.3 Inverter Command Register............................................................................................... 52
4.4 Frequency Command Register .......................................................................................... 53
4.5 Operation Mode Register ................................................................................................... 54
4.6 Inverter Reset Register ...................................................................................................... 54

Mitsubishi 700 Series Specifications

General

Control Method	Vector Control
Overload Capacity	150% of rated current for 60 seconds
Protection Functions	Overcurrent, Overvoltage, Undervoltage, Overheat, Short circuit
Communication Options	RS-485, Profibus, Ethernet
Output Power Range	0.4 kW to 630 kW
Cooling Method	Forced air cooling (fan) (Varies by model)
Operating Temperature	-10 to +50°C (Varies by model, may be derated at higher temperatures)
Storage Temperature	-20 to +65°C
Humidity	95% RH or less (non-condensing)
Altitude	Up to 1000 m above sea level (Derating may be required above 1000 m)
Enclosure Rating	IP20
Model	FR-A700, FR-F700, FR-E700, FR-D700, FR-S700