Mitsubishi 700 Series User Manual

III
4.7 Alarm History Clear Register ............................................................................................. 55
4.8 All Parameter Clear Register ............................................................................................. 55
4.9 Inverter Status Register ..................................................................................................... 56
4.10 Operation Mode Status Register ....................................................................................... 57
4.11 Alarm History Codes .......................................................................................................... 57
5 MITSUBISHI CONFIGURATION STUDIO 58
5.1 Overview.............................................................................................................................. 58
5.2 General Object Editing Activities ...................................................................................... 63
5.3 Ethernet Settings ................................................................................................................ 66
5.3.1 Authentication .......................................................................................................................................... 66
5.3.2 Network Configuration.............................................................................................................................. 67
5.4 Internal Logic Settings ....................................................................................................... 67
5.4.1 Fail-safe Values ....................................................................................................................................... 67
5.4.1.1 Overview ....................................................................................................................................... 67
5.4.2 Timeout Time ........................................................................................................................................... 68
5.4.2.1 Timeout Object Configuration ........................................................................................................ 68
5.5 Discovery over Ethernet .................................................................................................... 70
5.6 Manage Device Parameters ............................................................................................... 71

Mitsubishi 700 Series Specifications

General

Control Method	Vector Control
Overload Capacity	150% of rated current for 60 seconds
Protection Functions	Overcurrent, Overvoltage, Undervoltage, Overheat, Short circuit
Communication Options	RS-485, Profibus, Ethernet
Output Power Range	0.4 kW to 630 kW
Cooling Method	Forced air cooling (fan) (Varies by model)
Operating Temperature	-10 to +50°C (Varies by model, may be derated at higher temperatures)
Storage Temperature	-20 to +65°C
Humidity	95% RH or less (non-condensing)
Altitude	Up to 1000 m above sea level (Derating may be required above 1000 m)
Enclosure Rating	IP20
Model	FR-A700, FR-F700, FR-E700, FR-D700, FR-S700