MITSUBISHI CONFIGURATION STUDIO
Going Online with a Device
All connected devices are automatically added to the Discovered Devices panel. This panel is shown
by selecting the Online Devices list heading in the Project panel. To go online with a device:
• Double-click on it in the Discovered Devices panel.
• Right-click on it in the Discovered Devices panel and choose Go Online from the context-sensitive
menu.
• Hit the <ENTER> key on the keyboard when the device is selected in the Discovered Devices
panel.
• Drag it from the Discovered Devices panel into the Project panel.
• Select it and select Go Online with Device from the Edit menu.
• Select it and click the Go Online button in the toolbar.
When the studio goes online with a device, its configuration is automatically read. While the studio is
online with a device, it will appear in green text in the Discovered Devices panel. The studio may be
online with multiple devices simultaneously.
Uploading a Device’s Configuration into a Project
The current configuration of an online device can be uploaded into the Project panel by selecting a
device under the Online Devices list heading and then:
• Right-clicking on it and choosing Upload Configuration from the context-sensitive menu.
• Dragging it from the Online Devices heading into the Device Configurations heading.
• Selecting it and selecting Upload Configuration to Project from the Device menu.
To Next Page
Loading...
