Mitsubishi FX3U-4HSX-ADP - Representation of Errors

FX3U Series Programmable Controllers
User’s Manual - Hardware Edition
280
14 Test Operation, Adjustment, Maintenance and Troubleshooting
14.6 Judgment by Error Codes and Representation of Error Codes
14.6.3 Representation of errors
Errors are represented in this manual, GX Works2, GX Developer, and the display module as shown in the
following table.
• Comparison between this manual and GX Works2
• Comparison between this manual and GX Developer
• Comparison between this manual and the display module
This manual
GX Works2
SWDNC-GXW2-E(Ver. 1.73B) SWDNC-GXW2-J(Ver. 1.73B)
I/O configuration error I/O Configuration Error
PLC hardware error PLC Hardware Error
PLC/PP communication error PLC/PP Communication Error
Serial communication error 1
[ch1]
Link Error
Serial communication error 2
[ch2]
Serial Communication Error 2[ch2]
Parameter error Parameter Error
Syntax error Syntax Error
Circuit error Ladder Error
Operation error Operation Error
Special block error Special Block Error
Special parameter error Special Parameter Error
This manual
GX Developer
SWD5C-GPPW-E(Ver. 8.95Z) SWD5C-GPPW-J(Ver. 8.95Z)
I/O configuration error I/O config err
PLC hardware error PLC H/W error
PLC/PP communication error PLC/PP comm err
Serial communication error 1
[ch1]
Link error
Serial communication error 2
[ch2]
Link Error 2
Parameter error Param error
Syntax error Syntax error
Circuit error Ladder error
Operation error Operation err
Special block error SFB Error
Special parameter error
−−
This manual
Display module
Display in English Display in Japanese
I/O configuration error I/O error
PLC hardware error PLC H/W error
PLC/PP communication error Comms. error
Serial communication error 1
[ch1]
Link error1
Serial communication error 2
[ch2]
Link error2
Parameter error Parameter error
Syntax error Grammer error
Circuit error Ladder error
Operation error Runtime error
Special block error SFB error
Special parameter error −−