Mitsubishi FX3U-4HSX-ADP - System Information Setting Program Example

416
FX3U Series Programmable Controllers
User’s Manual - Hardware Edition
19 FX3U-7DM (Display Module)
19.18 System Information (Restrictions From PLC)
19.18.2 System information setting program example
The following is a program example in which the system information has been assigned to D50 to D90 and
M50 to M56.
Initial pulse
END
MOV K50 D8300
MOV K50 D8301
M8002
System information (system No.1) is set at D50 to D90.
System information (system No.2) is set at M50 to M56.