Mitsubishi FX3U-4HSX-ADP - I] Extension Power Supply Unit; J] Extension Cables and Connector Conversion Adapter [K] Battery [L] Memory Cassettes

FX3U Series Programmable Controllers
User’s Manual - Hardware Edition
47
3 Introduction of Products (Compliant with Overseas Standards)
3.1 List of Products (to be Connected) and Interpretation of Model Names
1
Introduction
2
Features and Part Names
3
Product Introduction
4
Specifications
5
Version and Peripheral Devices
6
System Configuration
7
Input/Output Nos., Unit Nos.
8
Installation
9
Preparation and Power Supply Wiring
10
Input Wiring
4. High-speed input/output functions
 : Compliance with standard or self-declaration  : Not targeted − : Not applicable
* Please consult with Mitsubishi Electric for information on marine standard practices and the
corresponding types of equipment.
→ For more information on CE, UL and cUL, refer to Page 15 or later.
3.1.8 [I] Extension power supply unit
 : Compliance with standard or self-declaration  : Not targeted − : Not applicable
→ For more information on CE, UL and cUL, refer to Page 15 or later.
3.1.9 [J] Extension cables and connector conversion adapter
[K] Battery [L] Memory cassettes
 : Compliance with standard or self-declaration  : Not targeted − : Not applicable
*1. When the extension cable (FX0N-30EC or FX0N-65EC) is used, use up to one cable for one system.
When an extension block is added, use FX2N-CNV-BC in addition to the cable.
These extension cables are unusable for FX2N-10GM and FX2N-20GM.
*2. Products manufactured in and after June, 2005 will comply with the overseas standard.
*3. Please consult with Mitsubishi Electric for information on marine standard practices and the
corresponding types of equipment.
→ For more information on CE, UL and cUL, refer to Page 15 or later.
Model name Description
CE
UL
cUL
Marine
EMC LVD
FX3U-4HSX-ADP For differential line driver input (for high-speed counter)  *
FX3U-2HSY-ADP For differential line driver output (for positioning output)  *
Model name Description
Driving power
supply
CE
UL
cUL
Marine
EMC LVD
FX3U-1PSU-5V Extension power supply 5V DC 1A 100 to 240V AC  −
Classification Model name Description
CE
UL
cUL
Marine
EMC LVD
Extension
cables
FX
0N-65EC*
1
0.65m
(2’1")
These cables are used to mount input/output
extension units/blocks for FX2N and special
function units/blocks (except for the FX2N-
10GM and FX2N-20GM) away from the main
unit.
− − − −
FX0N-30EC*
1
0.3m
(0’11")
− − − −
FX2N-GM-65EC
0.65m
(2’1")
This cable is used when FX
2N-10GM or
FX2N-20GM is mounted at the top of the
extension units/blocks.
− − − −
Connector
conversion
adapter
FX2N-CNV-BC
Connector conversion adapter to connect input/
output extension blocks for FX2N and special function
blocks with model FX0N-30/65EC extension cable
− − − −
Battery
FX3U-32BL
This battery backs up the following data.
• Program memory in built-in RAM
• Keep devices (battery backup devices)
• Results of sampling trace
• Time on clock
− − − −
Memory
cassettes
FX
3U-FLROM-
16
16k-step flash memory  − *3
FX
3U-FLROM-
64
64k-step flash memory
*
2
 − *3
FX3U-FLROM-
64L
64k-step flash memory (with transfer switch)  − *3
FX3U-FLROM-
1M
64k-step flash memory
(There is an area dedicated to the storage of
symbolic information.)
 − *3
H
I
J
K
L
J
J
K
L