(5)
Safety Precautions
(Read these precautions before use.)
6. TRANSPORTATION AND STORAGE PRECAUTIONS
Reference
• Before transporting the PLC, turn on the power to the PLC to check that the BATT LED is off.
If the PLC is transported with the BATT LED on or the battery exhausted, the battery-backed data
may be unstable during transportation.
• The PLC is a precision instrument. During transportation, avoid impacts larger than those specified
in the general specifications (section 4.1).
Failure to do so may cause failures in the PLC.
After transportation, verify the operations of the PLC.
• When transporting lithium batteries, follow required transportation regulations.
(For details of the regulated products, refer to Appendix E)
267
469
To Next Page
Loading...
