MTE PTS 400.3 PLUS - Switch Harmonics on; off

PTS 400.3 PLUS Operation Manual_R02 Page 100/306
7.5.6 Switch Harmonics ON / OFF
1
Switch on power source first
Status indication during ramping up voltage and current to the set value.
Status indication when the power source is switched ON
2
Select harmonics menu
• Harmonics menu on
• Display the harmonic monitor
3
Define or select the harmonics
4
Switch on the selected harmonics
Indication harmonics on
5
Run test
6
Switch off harmonics
Indication harmonics switched off