MTE PTS 400.3 PLUS - Energy Measurement Setup

PTS 400.3 PLUS Operation Manual_R02 Page 174/306
9.1.5 Energy measurement setup
Energy measurement setup menu
Parameters for register 1
Parameters for register 2
Parameters for register 3
Load /save settings from / to object file
in directory Counter Test Point Selec-
tions
Copy settings form input x to input y
Exit, back to calling menu
Indications / settings
Set parameters for register 1, 2 and 3
Parameters for energy measurement setup
Energy type
Test interval
Register resolution
Accuracy class
Exit, back to calling menu
Energy type
Select energy type with up / down cursors (cyclical mode):
P
Active energy import / export
Q
Reactive energy import / export
S
Apparent energy import / export
I
2
I
2
-hours (used at transformer loss meters, copper and leakage loss)
U
2
U
2
-hours (used at transformer loss meters, iron and core loss)
Test Interval
Value
Enter desired dosage interval for energy or time dosage.
Unit / mode
Select the appropriate unit with up down cursors (cyclical mode):
Unit
Mode
s, min, hr
Time dosage
Ws, Wh, kWh
Energy dosage