PTS 400.3 PLUS Operation Manual_R02 Page 13/306
Communication and operation
The Portable Reference Standard PRS 600.3 can be operated on a stand-alone basis or together
with the Portable Power Source PPS 400.3 which is in this application controlled via blue-tooth.
Extended functionalities
The PTS 400.3 PLUS allows to use several clamp-on CTs in the range of 100 A up to 3000 A or sen-
sors for voltage and current measurements on high voltage potential. The clamp-on CTs and high
voltage sensors are “clamped” around conductors to perform non-contact / intrusive measurements
without interrupting the circuit under test.
AmpLiteWire and VoltLiteWire sensors for volt-
age and current measurements on high voltage
potential up to 40 KV and currents up to 2000 A
To Next Page
Loading...