MultiSmart Installation & Operation Manual
4.2 Intuitive Operator Interface
The MultiSmart has screens which have been designed for operators of pump stations. The operator can see
at a glance:
• Level
• Pump mode
• Pump availability
• Detailed fault information
• Date/time of each fault occurring and clearing
• Single or 3-phase supply, DC supply
• Fault and event history (up to 50,000 records, or millions of records with SD card)
• Accumulators (starts, hours, faults, etc)
• Pump efficiency (requires energy monitoring, motor protection and flow enabled)
• Status of all I/O
• Status of a communications link
• Duration to Overflow
4.3 Intuitive Engineering Interface
The product has clear menu screens for altering:
• Pump set points
• Alarm set points
• Delays
• Alternation and grouping
• Level device and backup level device
• Number of pumps
• I/O and fault configuration
• Supply protection
• Energy Monitoring and Motor protection (where installed)
• Station optimization parameters (max run time, max off time, max starts per hour, plus many more)
• Data logging parameters
• Communications
• Profiles
MultiSmart_IO_Manual_R20 Page 13 of 260
To Next Page
