MultiSmart Installation & Operation Manual
10.3 Reservoir Monitor
The MultiSmart can also be configured as a Reservoir Monitor. In this mode there are no pumps to control,
so all functionality related to pumps and groups are unavailable. All remaining functionality is the same as for
the Pump Station Manager Module.
Reservoir Monitor
Alarm Setpoints
Profiles
Supply Protection
RTU
Comms Ports
Comms Protocols
Level Sensing
Data Logger
Flow
Security
Logic Engine
Figure 83 - MultiSmart Reservoir Monitor Overview
Page 76 of 260 MultiSmart_IO_Manual_R20
To Next Page
Loading...
Need help?
General