MultiSmart Installation & Operation Manual
26 SMS Server
MultiSmart has SMS Server functionality for sending SMS messages whenever configured alarm conditions
are triggered. SMS server uses PPP Manager 2 to send the SMS.
NOTE: This is an optional feature that must be purchased with the MultiSmart, or enabled later on the
MultiSmart before it can be used. PPP Manager 2 must also be enabled for this functionality to work.
Refer to section 29.2 for enabling the modules.
SMS Server configuration can be set up at:
Figure 167 – SMS Server Settings
For general SMS Server settings, press General Settings.
The following details can be configured in general settings:
• Station Name
• Number of SMS retries
• Wait period for an SMS acknowledgement
Page 222 of 260 MultiSmart_IO_Manual_R20
To Next Page
Loading...
Need help?
General