MultiSmart Installation & Operation Manual
10.2 Pump Station Manager
The Pump Station Manager module provides all the logic to control and monitor water and sewer pump
stations. In conjunction with the LCD module (and the LCD itself), it provides a complete operator interface
for control, monitoring and commissioning.
Pump Controller RTU
Power & Energy
Monitoring/
Motor Protection
Supply Protection/
Monitoring
Data Logger
Flow
Fault Module
Security
Logic Engine
Pumps
& Groups
Station
Optimization
Profiles
Fill/Empty & Pump
Setpoints, Alarm
Setpoints, Delays
Level
Sensing
Medium
RS232
TCP/IP
UDP/IP
Cellular
PLC - IEC61131-3
(ISaGRAF)
Additonal Master & Slaves
DNP3 Master/Slave
Additonal Master & Slaves
Modbus Master/Slave
Figure 82 - Pump Control Functionality Overview
MultiSmart_IO_Manual_R20 Page 75 of 260
To Next Page
Loading...
Need help?
General