MultiSmart Installation & Operation Manual
10.13 RTU
The MultiSmart can be supplied with optional RTU capabilities. Supported communication protocols are
Modbus and DNP3. The MultiSmart can also be shipped just as an RTU without any Pump Station Manager
functionality or user interface. See Section 21 for more information.
The diagram below illustrates the extensive communication capabilities of the MultiSmart, even though in
practice it is highly unlikely to use all of these in the same installation. MultiSmart can be interfaced with most
industry standard equipment and SCADA networks.
Page 80 of 260 MultiSmart_IO_Manual_R20
To Next Page
Loading...
