MultiSmart Installation & Operation Manual
The screens for which access is restricted are listed below, together with the operation type and the user
classes which are allowed to access these screens:
Screen Name Operation User Classes with access
Main Screen Write Operator, Electrician, Administrator
Date/Time Read Electrician, Administrator
Customize Display Read Electrician, Administrator
Alternation & Grouping Read Electrician, Administrator
Backup Options Read Electrician, Administrator
Station Optimization Read Electrician, Administrator
Set Points Read Electrician, Administrator
Configure Profile Read Electrician, Administrator
Motor Protection &
Efficiency
Read Electrician, Administrator
Supply Protection Read Electrician, Administrator
Data Logger Read Electrician, Administrator
IO Configuration Read Electrician, Administrator
Flow Settings Read Electrician, Administrator
Logic Engine Read Electrician, Administrator
Faults Screen Write Electrician, Administrator
Pump Commision Write Electrician, Administrator
Communications Read Scada Engineer, Administrator
Modify Modules Key Read Administrator
Setup Wizard Read Administrator
Advanced Settings Read Administrator
All Information Screens Write Administrator
Page 244 of 260 MultiSmart_IO_Manual_R20
To Next Page
Loading...
