Muratec MFX-3530 - Page 160

1
2
3
4
5
6
7
Registering destinations 7-9
Machine settings

Deleting destinations
1
Press [Setting] on My MFP Menu screen.
If My MFP Menu screen is not displayed, press <Mode> repeatedly until My MFP menu
screen is displayed.
2
Press [Register].
3
Press [Address Book Entry].
4
Press [Delete].
5
Select the destination you want to delete.
6
Press [Yes].
•Press [No] to close the screen without deleting the data.
•To continue deleting data, repeat the procedures from step 5.

Printing the address book destination list
1
Press [Setting] on My MFP Menu screen.
If My MFP Menu screen is not displayed, press <Mode> repeatedly until My MFP menu
screen is displayed.
2
Press [List].
3
Press [Address].
4
Press [Number] or [Alphabet].
•Number: The destinations will be printed in speed-dial number order.
•Alphabet: The destinations will be printed in alphabetic order.
5
Press [Yes].
Select [ON] to enable duplex printing, or [OFF] to disable it.