Muratec MFX-3530 - Page 18

1
Basic scanning 1-11
Basic scan functions
8
Press [User Name].
9
Enter the user name, and press [Enter].
•Up to 64 characters can be entered.
•For details on entering characters, see chapter 1, “Entering characters” in the
Administrator’s Guide.
10
Press [Password].
11
Enter the password, and press [Enter].
•Up to 28 characters can be entered.
•For details on entering characters, see chapter 1, “Entering characters” in the
Administrator’s Guide.
12
Press <Start>.
•When you have loaded the document on the automatic document feeder, this will conclude
the operation.
•When you have loaded the document on the document glass, a message will appear when the
first page of the document is scanned.
13
Load the next document, and press [Next Doc].
To finish scanning, press [Complete].
14
Repeat step 13 to scan all the documents.
To finish scanning, press [Complete].