1
2
3
4
5
6
7
Specifying default settings 7-37
Machine settings
Function Description Settings
Dialing Pause This sets the default dialing interval used when the
pause option is input.
0 - 10 Seconds:
2 Seconds
Rx Reduction Rate Select from “Auto” which automatically selects the
magnification according to the length of the document
being received, or “100%” to have all faxes printed out
at the same rate of reduction.
For details, see “List of recording methods” (page 3-22).
Auto
100 %
Reduction Margin This sets at what point the document printout will
extend to the following page if the document being
received cannot fit within the effective recordable area.
For details, see “Reduction margin” (page 3-23).
0 - 3.3 ":
1.6 "
Paper Saving This sets the print method for received documents. OFF
Duplex Rx
Quick Memory Tx If this is set to “ON”, fax transmission for multiple
documents will begin in order of page when it has
been scanned and stored.
OFF
ON
ECM Mode This mode enables any part of a fax that was
not transmitted correctly due to a line error will
automatically be resent. (The destination machine
must also have the same function.)
OFF
ON
Service Mode Do not set this. OFF
ON
Prefix By registering frequently used fax numbers, you can
enter a fax number simply by pressing a button.
Up to 40 digits can be entered for a prefix number.
Numbers, #, *, /P (Pause), and /T (Tone) can be entered.
For details, see “Dialing options” (page 3-10).
(Not registered)
Receive Time Stamp Prints the time that documents are received. This
enables you to accurately manage the arrival time of
received documents.
OFF
ON
Auto Print Journal You can print a list of communication jobs. OFF
ON
Reserve print
Duplex:
OFF
ON
Journal Line Up You can select whether to arrange printed journal
reports in order of job or in order of communication
number.
OFF
ON
NOTE
Underlined values are the default settings specified at the time of shipment.
To Next Page
