NEC Univerge SV8100 - Install the PZ-BS11 Expansion Blade in the CHS2 U Expansion Chassis

Issue 4.1 UNIVERGE SV8100
3 - 46 Installing the SV8100 Chassis
8. Align the door tabs with hinges and reattach the
cover.
9. Close the PZ-BS10 cover.
2.7.4.3 Install the PZ-BS11 Expansion Blade in the CHS2U
Expansion Chassis
.
For the Expansion Chassis to function, the PZ-BS10 blade must
be installed in Controlling Chassis.
1. Ensure the chassis is powered down.
Figure 3-53 PZ-BS10 Blade Installed
Figure 3-54 PZ-BS10 Installed (Cover Closed)
Do not remove or install this blade with
the power on.