System Hardware Manual 3 - 1
Chapter
3
Installing the SV8100 Chassis
SECTION 1 GENERAL INFORMATION
This chapter contains information to help the technician install the chassis
for the SV8100 system. The technician should be familiar with this section
before installing any equipment.
SECTION 2 INSTALLING THE CHASSIS
The CHS2U-EU chassis has six universal blade slots for legacy line/trunk
blade (Single Line Telephone Interface, Digital Multiline Terminal
Interface, Central Office Trunk, ISDN PRI Interface, etc.), In-skin
Application Blades (In-skin UMS, In-Skin Router, etc.). It also houses the
BUS Interface Blade, Power Supply Unit (PSU) and Cooling FAN.
When the CD-CP00 blade is installed in the first 19” chassis, it is referred
to as the controlling chassis. Additional chassis, referred to as expansion
chassis, can be installed to increase the capacity of the system to meet the
customer’s business needs. Each chassis (Expansion or Controlling), is
powered by a MPS7101 power supply.
The chassis can be wall mounted, floor mounted, stand mounted or rack
mounted. The first part of the this chapter describes the differing types of
mounting options and the rest of this section describes how to install the
chassis.
To Next Page
Loading...
