UNIVERGE SV8100 Issue 4.1
System Hardware Manual 3 - 19
2.3.2 Multiple CHS2U Chassis Installation
Expansion chassis (maximum of three) can be added to the CHS2U
STAND KIT and will require an additional CHS2U STAND KIT (EXT)
per chassis.
1. Install the five rubber feet to the bottom of each chassis.
2. Each additional chassis will require CHS2U STAND KIT (EXT)
to be installed (refer to Figure 3-22 Install Additional CHS2U
STAND KIT (EXT) on page 3-20).
Figure 3-21 Attach Rubber Feet to CHS2U Chassis
To Next Page
Loading...
