NEC Univerge SV8100 - CHSGW SMALL BATT BOX to CHS2 U GW Connection

Issue 4.1 UNIVERGE SV8100
3 - 74 Installing the SV8100 Chassis
7. Reattach the cover with the two screws previously removed.
3.3.2 CHSGW SMALL BATT BOX to CHS2U GW Connection
1. Power down the CHS2U GW chassis.
2. Disconnect AC power cable from rear of chassis.
3. From the back of the 9.5” chassis, remove the black plastic
square covering the two-prong battery terminal leads.
Figure 3-97 Reattaching the Top Cover Using Screws
Figure 3-98 9.5” Battery Terminal Cover
Ensure the CHS2U GW chassis is powered
OFF.