UNIVERGE SV8100 Issue 4.1
System Hardware Manual 3 - 73
5. The metal bracket is placed on top of the batteries and able to
hold them in place. Insert the metal tabs of the bracket into the
slots on the side of the battery compartment and lower into
place. Using the two screws provided, attach the bracket to the
battery compartment.
6. Insert the battery cable through the slot on the battery
compartment and connect the battery cable to the connection
points on the battery compartment (refer to Figure 3-94
Installing the Batteries on page 3-72).
Figure 3-95 Installing the Bracket Using Screws
Figure 3-96 Installing the Battery Connection Cables
To Next Page
Loading...
