NEC Univerge SV8100 - Wall Mounting the 19 Chassis; CHS2 U Chassis Wall Mount Installation

Issue 4.1 UNIVERGE SV8100
3 - 4 Installing the SV8100 Chassis
2.1 Wall Mounting the 19” Chassis
When wall mounting the chassis, ensure the wall can support the weight of the
chassis (55 lbs per system chassis ---- including blades, cords, power supply,
etc.). The chassis is secured to the wall with a wall mount bracket. Ensure
that enough space is available to allow the installation of additional expansion
chassis.
2.1.1 CHS2U Chassis Wall Mount Installation
1. Use the template shown in Figure 3-5 Wall Mount Spacing
Guide (19” Chassis) on page 3-4 for required spacing before
drilling.
Figure 3-5 Wall Mount Spacing Guide (19” Chassis)
Upper Surface of Wall Mount Bracket