Issue 4.1 UNIVERGE SV8100
3 - 14 Installing the SV8100 Chassis
7. Connect the ground wire to all chassis. Refer to 2.7.5 Install
19” Chassis Grounding on page 3-52 for complete details on
grounding the system.
8. Refer to 2.7 Installing the 19” Chassis on page 3-39 to continue
installation of the chassis or, Chapter 5 paragraph 2.2
Installing an Extension or Trunk Blade on page 4-4 for
installation of blades.
2.2.2 Multiple CHS2U Chassis Installation
Expansion chassis can be secured to the CHS BASE UNIT and will
require an additional CHS2U JOINT BRACKET KIT per chassis.
Figure 3-15 Install CHS2U JOINT BRACKET KIT
To Next Page
Loading...
