Issue 4.1 UNIVERGE SV8100
5 - 34 Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals
4.7 Installing a Numbered Keypad on the Multiline Terminal
The BS( )-L Kits are keypad sets, which can be installed on a multiline
terminal replacing the Standard Numbered Keypad. The D
term
Series i Retro
is an optional keypad available to be used with the IPK II and IPS terminals.
Standard Numbered Keypad
The standard keypad (in black or white), is commonly delivered with the
UNIVERGE SV8100 terminal (refer to Figure 5-31 Standard Numbered
Keypad on page 5-35).
Figure 5-30 Attaching Directory Card Holder to the Multiline Terminal
To Next Page
Loading...
