NEC Univerge SV8100 - 8 Lkd (Ld)-L (Bk) Unit;8 Lkd (Ld)-L (Wh) Unit

UNIVERGE SV8100 Issue 4.1
System Hardware Manual 5 - 51
8. Open the small door covering the side option
connectors by pulling the cover handle to the front.
9. Connect the cable from the 8LK-L UNIT to the side
option connector (see Figure 5-54 Install the 8LK-L
UNIT Cable) on the multiline terminal and close the
cover.
10. Attach the side panel to the side of the 8LK-L UNIT.
11. Return the multiline terminal to the buttons side up
position.
12. Complete the installation by reattaching both plastic
panels to the front of the multiline terminal.
5.2.2 8LKD (LD)-L (BK) UNIT/8LKD (LD)-L (WH) UNIT
Provides eight additional line keys to DT300 Series (DTL) terminals.
The unit features:
 Mounts directly to top side of terminal
 Supports Desi-less 2 LCD panels
 Eight line keys by four pages
Figure 5-54 Install the 8LK-L UNIT Cable
Telephone
Connection Cable
Side Option
Connector
Cover