NEC Univerge SV8100 - Connecting the Paired Device; Unpairing; Visibility Setting

UNIVERGE SV8100 Issue 4.1
System Hardware Manual 5 - 91
8.1.2.4 Connecting the Paired Device
Enable the Bluetooth device. Select [2. Enable] in the
connection screen.
8.1.2.5 Unpairing
To unpair a paired the Bluetooth device, select the device
in the [Delete] screen.
8.1.2.6 Visibility Setting
Set whether to make information about the BHA-L UNIT
visible to other Bluetooth devices (default: [1. Disable]).
After pairing a Bluetooth device, be sure to
configure its connection to enable it. If
settings are not completed, the Bluetooth
device that does the pairing cannot be used.
Figure 5-115 Connecting the Paired Device
Figure 5-116 Unpairing a Device
Figure 5-117 Setting Visibility Option