NEC Univerge SV8100 - Wall Mounting the Base on a Switch Box

UNIVERGE SV8100 Issue 4.1
System Hardware Manual 5 - 47
4.10.1.4 Wall Mounting the Base on a Switch Box
1. Locate the screw holes on the base and hang the
cover over the screws on the switch box as
illustrated in Figure 5-49 Wall Mounting Base on
Switch Box.
2. Hang the Multiline Terminal on the base.
. Because of strength variation in switch boxes, this
method is not recommended.
Figure 5-49 Wall Mounting Base on Switch Box
Figure 5-50 Wall Mounted Multiline Terminal