UNIVERGE SV8100 Issue 4.1
System Hardware Manual 4 - 17
3.1.1 Description
The CD-CP00 controls all the functions and operations of the
SV8100 system using the system software loaded into the CD-CP00
memory. The system software can be upgraded as new software
becomes available.
One CD-CP00 blade must be installed in the Controlling Chassis.
The CD-CP00 functions are:
Music on Hold tone Circuit, External Source Control Circuit
PZ-VM21 Interface Circuit
System Program and System Data Storing Memory Circuit
USB Interface Circuit
Ethernet Interface Circuit
Figure 4-4 CD-CP00 Blade with Daughter Boards Installed
To Next Page
Loading...
