NEC Univerge SV8100 - Panel( )-L Unit; WM-L UNIT Attached to Wall

UNIVERGE SV8100 Issue 4.1
System Hardware Manual 5 - 65
5.2.6 PANEL( )-L UNIT
Optional plastic color side panels that allow users to customize the
ITL/DTL terminals. The following colors are available for the Base
(all), VLCD (Value LCD) and SLCD (Sophi LCD) terminals:
 Silver (original)
 Red
 Blue
 Clear
 Wood Grain
 Environmental
. Right and Left side panels are not interchangeable.
5.2.7 WM-L UNIT Attached to Wall
The WM-L UNIT (Wall Mount Unit) is used to attach any DT300/
DT700 Series multiline terminal to the wall. This unit connects to the
back side of the telephone.
When optional adapters are used, the multiline terminal must be
installed on the wall using the WM-L UNIT.
1. Plug line cord in the wall receptacle. Leave about eight inches
of cord and bundle the rest.
2. Feed the line cord through the opening in the WM-L UNIT.
Figure 5-75 LCD (BL)-L UNIT
Figure 5-76 PANEL( )-L UNIT