Issue 4.1 UNIVERGE SV8100
5 - 66 Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals
3. Attach the WM-L UNIT to the wall using four screws (refer to
Figure 5-77 Attach the WM-L UNIT to Wall).
4. Align the four cutouts with the four tabs on the WM-L UNIT
(refer to Figure 5-78 Cutouts for WM-L UNIT).
Figure 5-77 Attach the WM-L UNIT to Wall
Figure 5-78 Cutouts for WM-L UNIT
To Next Page
Loading...
