NEC Univerge SV8100 - Installation

Issue 4.1 UNIVERGE SV8100
4 - 28 Installing the SV8100 Blades
Table 4-11 PZ-ME50 Capacities provides the memory capacities for
the PZ-ME50 blades.
Table 4-12 PZ-ME50 Capacities provides the maximum capacities
for the PZ-ME50 blade.
3.2.2 Installation
To install a PZ-ME50
on the CD-CP00:
Table 4-11 PZ-ME50 Capacities
Description
Memory
Capacity
Equipped Memory
SDRAM 128 MB 256 MB / 16 bit x 4 pcs
Flash
Memory
32 MB 256 MB / 16 bit x 1 pc
SRAM 1 MB 4 MB / 16 bit x 2 pcs
Table 4-12 PZ-ME50 Capacities
Basic System
(CD-CP00)
Memory
Expansion
Board
PZ-ME50
System 256
Port License
System
Unlimited
Port License
* NetLink
(Networked
Chassis)
64 Ports without PZ-ME50 X –– – –
64 Ports with PZ-ME50
(Memory Expansion
Board)
XX––X
256 Ports XXX– X
Unlimited Ports (Up to 512) XXXXX
X = Supported
– = Not Supported
* = Refer to NetLink feature in the SV8100 Features and Specifications Manual for more details regarding the
NetLink feature.
. Only 1 CD-LTA blade can be installed when the CD-CP00 is installed without the PZ-ME50. Up to 23
CD-LTA blades can be installed per system when the PZ-ME50 is installed on the CD-CP00.
Do not remove or install the CD-CP00 with the
power on.