UNIVERGE SV8100 Issue 4.1
System Hardware Manual 3 - 39
5. Connect grounding wire to chassis. Refer to 2.8 Installing the 9.5”
Chassis on page 3-54 for complete details on grounding the system.
6. Refer to 2.8 Installing the 9.5” Chassis on page 3-54 to continue
installation of the chassis or, Chapter 6 paragraph 2.2 Installing an
Extension or Trunk Blade on page 4-4 for installation of blades.
2.7 Installing the 19” Chassis
There are two types of chassis; the controlling (with the CD-CP00 installed)
and the expansion (that does not have the CCPU blade installed). As
discussed in other chapters, multiple chassis can be linked together to expand
the port size of the system.
Figure 3-44 Secure the 9.5” Stand Mounting with Screws
To Next Page
Loading...
