Issue 4.1 UNIVERGE SV8100
4 - 62 Installing the SV8100 Blades
4.4.3 Connectors
Table 4-29 PZ-4LCA/PZ-8LCE/ RJ-61 Cable Connector Pin-Outs
show the pin-outs for the RJ-61 connector. Refer to Figure 4-21
Installing the PZ-4LCA Daughter Board on page 4-58 and Figure
4-22 Installing the PZ-8LCE Daughter Board on page 4-59 for
illustrations showing the location of the connectors on the SLIDB
blades.
Table 4-29 PZ-4LCA/PZ-8LCE/ RJ-61 Cable Connector Pin-Outs
RJ-61 Cable Connector –
48SLIDB – CN2 (ports 9~12)
8SLIDB – CN2 (ports 9~12), CN3 (ports 13~16)
Pin No. Connection
1 T4 (Tip for port 4)
2 T3 (Tip for port 3)
3 T2 (Tip for port 2)
4 R1 (Ring for port 1)
5 T1 (Tip for port 1)
6 R2 (Ring for port 2)
7 R3 (Ring for port 3)
8 R4 (Ring for port 4)
To Next Page
Loading...
