Issue 4.1 UNIVERGE SV8100
3 - 64 Installing the SV8100 Chassis
5. Secure the CHS LARGE BATT BOX to the CHS BASE UNIT
using the CHS2U JOINT BRACKET KIT. Refer to Figure 3-79
Installing the CHS LARGE BATT BOX using the CHS2U JOINT
BRACKET KIT on page 3-64.
3.2.2 Battery Installation
1. Loosen screw on front of CHS LARGE BATT BOX. Refer to
Figure 3-80 Removing CHS LARGE BATT BOX Cover.
2. Swing cover outward and detach from CHS LARGE BATT
BOX.
Figure 3-79 Installing the CHS LARGE BATT BOX using the CHS2U JOINT
BRACKET KIT
Figure 3-80 Removing CHS LARGE BATT BOX Cover
To Next Page
Loading...
