UNIVERGE SV8100 Issue 4.1
System Hardware Manual 3 - 65
3. Remove two screws from front of Battery Tray Suppressor.
Refer to Figure 3-81 Removing Battery Tray Suppressor.
4. Slide Battery Tray Suppressor outward to remove.
5. Slide Battery Tray(s) out of CHS LARGE BATT BOX.
6. Loosen two screws and remove the Battery Tray Cover. Refer
to Figure 3-82 Removing Battery Tray Cover.
Figure 3-81 Removing Battery Tray Suppressor
Figure 3-82 Removing Battery Tray Cover
To Next Page
Loading...
