NEC Univerge SV8100 - Installing the GBA-L UNIT

Issue 4.1 UNIVERGE SV8100
6 - 52 Installing SV8100 Optional Equipment
11.6.1 Installing the GBA-L UNIT
1. Turn multiline terminal upside down.
2. Unplug the line cord and handset cord from the multiline
terminal.
. Only one GBA-L UNIT can be attached to the DTL/ITL multiline
terminal.
3. Lower the tilt leg to the first position (refer to Figure 6-48
Separate Tilt Leg from Leg Support on page 6-53).
Figure 6-47 GBA-L UNIT
Before installing or removing the GBA-L
UNIT, remove the line cord, LAN cable, and
then AC adapter from the outlet.