Issue 4.1 UNIVERGE SV8100
4 - 90 Installing the SV8100 Blades
5.6.3 LED Indications
LED indications for the CD-PRTA are listed in Table 4-47 CD-PRTA
LED Indications. Each LED is listed with its associated function and
LED and Operational status. Refer to Figure 4-31 CD-PRTA LED
Indication Pattern of Layer 1 on T1 Unit on page 4-91 for LED pattern
information.
Table 4-47 CD-PRTA LED Indications
LED Indication
Operation Status Remarks
Live LED
(Green)
Busy LED
(Red)
On ON System Initialising
Flash (1s) On The assignment of the unit is refused. When you exceed the system
capacity.
When the main software
version is not matched.
Flash (1s) Trouble found during self-diagnostics. -
Flash (100mS) On Normal
Operation
A Channel is busy
(use
another from CH1 ~
CHx).
-
Off All channels are idle. --
Off On Unit Busy A Channel is busy
(use
another from CH1 ~
CHx).
-
Off All channels are idle. -
Flash
(100ms
On/Off)
Downloading firmware. -
To Next Page
Loading...
