NEC Univerge SV8100 - Connectors

UNIVERGE SV8100 Issue 4.1
System Hardware Manual 4 - 47
4.1.4 Connectors
The CNx01 connectors provide connection to four digital station
ports. With the CD-16DLCA blade, the CN101, CN201, CN301, and
CN401 connectors are available. With the CD-8DLCA blade the
CN301 and CN401connectors are removed from the blade.
Table 4-21 CD-8DLCA/CD-16DLCA/ RJ-61 Cable Connector
Pin-Outs on page 4-48 show the pin-outs for the RJ-61 connector.
Refer to Figure 4-16 CD-8DLCA Blade on page 4-44 and Figure 4-17
CD-16DLCA Blade on page 4-45 for the location of the connectors
on the ESIU blades.
Flash
(100ms)
On
Normal
Operation
A Channel is busy (use
another from CH1 ~ CHx).
–
Off All channels are idle. –
Off
On
Unit Busy
A Channel is busy (use
another from CH1 ~ CHx).
–
Off All channels are idle. –
Flash (100ms
On/Off)
Downloading firmware. –
Table 4-20 CD-8DLCA/CD-16DLCA LED Indications (Continued)
LED Indication
Operation Status Remarks
Live LED
(Green)
Busy LED
(Red)
Any cabling to the DLCA blade must be within the
building - no outside cabling is permitted.