Issue 4.1 UNIVERGE SV8100
5 - 24 Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals
2. Lead the Line and Handset cables through the applicable grooves.
4.2 Applying Power to the DT700 Multiline Terminals
The DT700 terminals support two different methods to power the terminal:
AC-2R/AC-3R
Plug the optional AC-2R/AC-3R AC Adapter input Jack in the terminal
base unit, and plug the wall plug of the AC Adapter in a standard 230
Vac wall outlet.
In-Line Power/PoE (Power over Ethernet)
In-Line Power (sometimes called Power Over Ethernet) is a LAN
technology that allows standard 10 Base-T/100 Base-TX data cables to
pass electrical current from a power source to a requesting end device.
Figure 5-18 Leading Line Cords on a Multiline Terminal
To Next Page
Loading...
