Issue 4.1 UNIVERGE SV8100
5 - 52 Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals
5.2.2.1 Installing the 8LKD (LD)-L UNIT
1. Turn multiline terminal upside down.
. Only one 8LKD (LD)-L UNIT can be attached to the
DTL multiline terminal.
2. Pry the side panel from the multiline terminal.
Figure 5-55 8LKD (LD)-L UNIT
Figure 5-56 Remove Side Panel from Multiline Terminal
To prevent possible damage to the 8LKD
(LD)-L UNIT or the DTL multiline
terminal during installation or removal,
disconnect the line cord/LAN cable and
the AC/DC adapter from the DTL
multiline terminal.
To Next Page
Loading...
