NEC Univerge SV8100 - DT300;DT700 Series Optional Terminal Equipment; 8 Lk-L (Bk) Unit;8 Lk-L (Wh) Unit; Installing the 8 LK-L UNIT

UNIVERGE SV8100 Issue 4.1
System Hardware Manual 5 - 49
5.2 DT300/DT700 Series Optional Terminal Equipment
5.2.1 8LK-L (BK) UNIT/8LK-L (WH) UNIT
Provides eight additional line keys to ITL or DTL terminals (except
Economy). The unit features:
 Mounts directly to right side of terminal
 Supports Red and Green LED colors
5.2.1.1 Installing the 8LK-L UNIT
1. Remove both plastic panels from the front of the
multiline terminal.
2. Turn multiline terminal upside down.
. Only one 8LK-L UNIT can be attached to the DTL/ITL
multiline terminal.
Figure 5-51 8LK-L UNIT
To prevent possible damage to the 8LK-L
UNIT or the DTL/ITL multiline terminal
during installation or removal,
disconnect the line cord/LAN cable and
the AC/DC adapter from the DTL/ITL
multiline terminal.