NEC Univerge SV8100 - CD-RTB (4-Port ); Description

UNIVERGE SV8100 Issue 4.1
System Hardware Manual 4 - 103
6.2 CD-RTB (4-Port )
6.2.1 Description
The Router blade is a 4-port switching hub which complies with the
ethernet specification for both 100Base-TX and 10Base-T. This
blade is compatible in LAN applications using 10Mbps and 100Mbps.
All ports automatically identify and switch 100Base-TX, 10Base-T
and Full/Half Duplex. This blade provides:
 Configurable on Each Port: Auto Negotiation/Full Duplex/Half Duplex
Figure 4-36 CD-RTB Blade