Issue 4.1 UNIVERGE SV8100
3 - 18 Installing the SV8100 Chassis
4. Connect the ground wire to all chassis. Refer to 2.7.5 Install
19” Chassis Grounding on page 3-52 for complete details on
grounding the system.
5. Refer to 2.7 Installing the 19” Chassis on page 3-39 to continue
installation of the chassis or, Chapter 5 paragraph 2.2 Installing
an Extension or Trunk Blade on page 4-4 for installation of
blades.
Figure 3-20 Secure Stand Mount to Floor with Screws
To Next Page
Loading...
