Issue 4.1 UNIVERGE SV8100
3 - 48 Installing the SV8100 Chassis
4. Pull the cover toward you to remove.
. Cover must be removed to install PZ-BS11 blade.
5. Align the PZ-BS11 blade with the guides located
within the expansion bay.
6. Slide the PZ-BS11 blade into the chassis until
resistance (back plane) is felt.
7. Gently push until the blade seats and install the
supplied retaining screw.
Figure 3-57 PZ-BS11 Blade Guides
Figure 3-58 Installing PZ-BS11 Blade in
Expansion Chassis
To Next Page
Loading...
