UNIVERGE SV8100 Issue 4.1
System Hardware Manual 3 - 59
7. Install two 2.3 AH-12V batteries (locally procured) into the CHS2U BATT
MTG KIT (refer to Figure 3-73 Installing Two Batteries).
. The first battery must be installed on the left side, then slid to the right due to an
installation tab on the mounting kit.
8. Using the supplied screws, secure the brackets to the CHS2U BATT
MTG KIT (refer to Figure 3-73 Installing Two Batteries on page 3-59).
Figure 3-73 Installing Two Batteries
To Next Page
Loading...
