UNIVERGE SV8100 Issue 4.1
System Hardware Manual 3 - 69
3. Remove fan access panel from rear of CHS2U chassis. Refer
to Figure 3-88 Removing Fan Access Panel.
4. Connect one end of Battery Connection Cable to Battery
Connector on rear of Basic and Expansion chassis.
5. Connect other end of cable to Battery Connector on rear of
CHS LARGE BATT BOX chassis. Refer to Figure 3-90 Single
CHS LARGE BATT BOX Connection or Figure 3-91 Dual CHS
LARGE BATT BOX Connection.
Figure 3-88 Removing Fan Access Panel
Figure 3-89 Connecting External Battery to CHS2U
To Next Page
Loading...
