UNIVERGE SV8100 Issue 4.1
System Hardware Manual 5 - 37
3. Slide the replacement numbered keypad into the grooves
located on the inside of the telephone, then press down on the
keypad to snap it into place. See Figure 5-35 Install New
Numbered Keypad into DT300/DT700 Series Terminal.
4. Insert the DESI printer sheet and plastic panels on the multiline
terminal. Refer to Figure 5-36 Install Plastic Panels.
Figure 5-35 Install New Numbered Keypad into DT300/
DT700 Series Terminal
Figure 5-36 Install Plastic Panels
To Next Page
Loading...
